Short Description

Model No.: bolted-bonnet-globe-valve

China Valves Manufacturer www.sfutube.com offers bolted bonnet globe valve.

Request a quote Share

Key Specifications / Features

Type: Bolted Bonnet Globe Valve
Design & Manufactured to API 6D, ASME B16.34 or Equivalent
P.T Ratings to ASME B16.34
Face to Face dimensions to ASME B16.10
Flanged Ends to ASME B16.5
Butt-weld Ends to ASME B16.25
Threaded Ends to ASME B1.20.1
Socket-weld Ends to ASME B16.11
Valves Marking to MSS SP-25
Inspect & Tested to API 598
Size Ranges from 1 1/2” thru 24”
Pressure Ratings from Class 600 to Class 2500, PN110 to PN420
Structures in Bolted or Pressure Sealed Union Cover
Ends Connections in Flanged R.F or RTJ, Threaded NPT, BSPT, Welded S.W, B.W and Grooved
Body Materials available in Cast Carbon Steel, Low Temp. Carbon Steel, Alloy Steel, Stainless Steel, Monel, Alu. Bronze etc.
Trim Materials available in 13%Cr, F11, F22, SS304, SS304L, SS316, SS316L and other specials.

What are Bolted Bonnet Globe Valves

Bolted Bonnet Globe Valves (manual globe valves) are used for throttling control. Closure is achieved by moving the disc against the air flow rather than across the disc like gate valves.

We focus on valves in standard and special materials as customer request.
Our main materials show as the follows:
Any request for other materials, please contact our machinery sales or engineering team on email.

Special Material Titanium or Titanium alloy series Titanium (Gr.2,Gr.3,Gr.5,Gr.7,Gr.12)
Nickel alloy series Ni6,Ni200,Ni201
Monel 400,Monel k500
Inconel 600/625/690/750
Incoloy 800/825/800H/800HT
Hastelloy B3/C/C4/C22/C276/G30
Zirconium alloy series Zirconium 702/703/705
Bronze alloy series Nickel aluminum bronze C95800
(Super) Duplex Steel ASTM F51/F53/F55
Other corrosion resistance Alloy 20,AISI 321,310,904L
Normal Material Carbon Steel WCB,WCC,LCB,LCC,A105N,LF2
Alloy Material (Low Temperature) LC1,LC2,LC3,LF3
Alloy Material (High Temperature) WC1,WC6,WC9,C5,C12A
Stainless Steel CA15,CF8,CF8M,CF3,CF3M
cast steel globe valves bolted bonnet - Bolted Bonnet Globe Valve

This illustration represents a typical Kinka bolted bonnet globe valve. There will be some minor modifications in each class, type and size.

  1. Body
  2. Bonnet
  3. Disc  is swivel plug type. Ball type or needle type disc can be provided when so requested.
  4. Seat Rings in this illustration is screwed-in type. When the hard faced seat is requested, the seat is formed on the body by stellite deposit.
  5. Stem
  6. Gasket
  7. Bonnet Bolts
  8. Gland is two-piece, ball type which exerts uniform pressure on the packing without binding the stem in the event that nuts are unevenly tightened.
  9. Gland Packing
  10. Handwheel or Bevel-Gear Type Valve Operator (not illustrated here)

Request a quote

    Subject:

    Products Related to Bolted Bonnet Globe Valve